Teac CD-RW750 Manuel d'utilisateur télécharger pdf (Page 27)

5 – After recording

TASCAM CD-RW750 Owner’s Manual 27

1 With the disc loaded, and the unit in stop

mode, press the

ERASE key (G or D).

2 Turn the MULTI JOG control B or use the

SKIP

keys I until the display shows DISC

REFRESH

3 To refresh the disc, press the MULTI JOG con-

trol or press the

ENTER key 7.

NOTE

This operation cannot be undone. If you are going to

refresh a disc, make sure that it contains only recordings

that you really want to erase!

4 If you do not want to proceed with the refresh

operation, press any other key (such as the

STOP key).

5 If the erase operation has been selected, the

word

ERASE flashes on the display, and the

timer starts counting down. The refresh oper-

ation typically takes around 40 minutes or so.

6 At the end of the countdown period, the word

Complete appears briefly on the display,

and the display returns to the track/time

display (of course, there are no tracks, and the

disc is as the start, with the total time of the

disc available for recording).

Titling (CD TEXT)

The CD-RW750 allows you to add titles to discs and/

or tracks on the disc which can be read and displayed

by suitably-equipped players (naturally, the CD-

RW750 is itself such a player, capable of reading and

displaying CD TEXT—see “Simple playback opera-

tions” on page 15 and “Time display modes” on

page 15).

Up to 23 alphanumeric characters (including space)

may be written in a title. One title may be written per

disc and per track (for example, it is not possible to

enter the disc title and artist as separate titles).

NOTE

Titling can only be carried out on an unfinalized record-

able disc, and the titles only become readable by a

player after the disc has been finalized.

This is a menu option, accessed in the following way

(this describes the operation from the main unit—

you can also use the

SKIP keys of the remote control

unit rather than turning the

MULTI JOG control, and

the

ENTER key of the remote control unit rather than

pressing the

MULTI JOG control).

1 Press the MENU key until the display shows

CD TEXT?. Press the MULTI JOG control.

2 The display shows T_EDIT DISC?. To

edit the disc title, press the

MULTI JOG con-

trol, or to start editing the track titles, turn the

control so that the display shows

T_EDIT>01

Continue turning the control to select the

track whose title will be edited, and press it

when the number of the track whose title will

be edited is displayed.

3 Use the MULTI JOG control both to enter char-

acters (uppercase and lowercase letters, num-

bers, and symbols) and to move the entry

cursor.

Change between these two cursor modes with

the

FADER (JOG MODE) key,

• When the MULTI JOG is used for data entry,

the cursor is a flashing underline (changing

to data entry mode inserts a space at the

cursor). Turn the control to select the char-

acter, and push it to confirm the entry and

move to the next character position.

• When the MULTI JOG is used for cursor

movement, the cursor is a steadily-lit under-

line.

• Use the ERASE/DEL key to delete characters

at the cursor.

• Change between uppercase and lowercase

letters using the

DISPLAY key. When upper-

case is selected,

CAPS

is shown in the display.

4 Press the FINALIZE/YES key to finish editing

the title. The display shows

Writing fol-

lowed by

Write OK and returns to

T_EDIT. From this step, you can then select

another title to edit.

5 Press the STOP key when all titles are finished.

6 Finalize the disc (see “Finalizing” on page 25).

1 2 ... 22 23 24 25 26 27 28 29 30

Commentaires sur ces manuels

Pas de commentaire

Teac CD-RW750 Manuel d'utilisateur Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Audio Teac CD-RW750