Teac CD-RW750 Manuel d'utilisateur télécharger pdf (Page 11)

TASCAM CD-RW750 Owner’s Manual 11

2 – Features of the CD-RW750

Front panel

1 POWER switch The power switch is used

to switch the unit on and off.

When the unit is turned on, the display shows

Welcome!.

2 Disc tray Discs should be placed label side

upwards in the disc tray.

When a disc is loaded into the unit, the display

briefly shows

TOC Reading., with a flashing

period following the word “Reading” as the unit

determines the contents of the disc.

3 OPEN/CLOSE key Use this key to open

and close the disc tray. The display shows

OPEN

when the tray is opening and

CLOSE when the tray

is closing.

4 REPEAT key Use this key to set the different

repeat modes available.

5 DIGITAL DIRECT When this is active, any

digital audio signals input to the unit bypass the fre-

quency converter and the digital volume control. See

“Digital direct” on page 23 for details.

6 INPUT SELECT Repeated presses of this

key cycle through the different audio inputs and the

input combinations. See “Input selection” on page 18

for full details.

7 REMOTE SENSOR This is not a control,

but the sensor for the remote control unit. When

using the remote control unit, make sure that there is

a clear path from the remote control unit to the

sensor.

8 Display The display is used to show the cur-

rent status of the unit, as well as the current menu

settings.

9 MENU key Repeated presses of this key cycle

through the different menu items used to set parame-

ters.

A DISPLAY key Repeated presses of this key

cycle through the different time display modes.

These modes differ, according to whether the unit is

playing back or recording a disc.

B MULTI JOG control Use this control to

select tracks for playback, to set parameter values,

and to set the titles of discs and tracks, etc.

Typically, turning the control clockwise will increase

a value, and turning it counterclockwise will

decrease the value. There is no “end-stop” to the con-

trol—it may be turned continuously in either

direction.

In addition, pushing the control acts like an “enter”

key, i.e. the currently-displayed value or setting is

confirmed.

C TIMER switch (PLAY, OFF) Use this

switch to control the behavior of the unit when power

is switched on. See “Using the timer function” on

page 14 for details.

D PHONES jack and LEVEL control Use

a standard pair of stereo headphones, equipped with a

1/4-inch plug, with this jack.

Adjust the volume from the jack with the control

(turn clockwise for higher volume).

E INPUT controls Use these concentric con-

trols to adjust the level of the analog audio signals

received at the

ANALOG IN jacks N. Typically, turn-

ing one of these controls will cause the other to turn,

but they can be turned independently of each other.

12345678 9AB

CD EFGHIJ KLM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Teac CD-RW750 Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Audio Teac CD-RW750